1. General

This specification covers the design requirements and performance standards for the supply of optical fiber cables as described below.  The features described in this document are intended to provide information on the performance of the optical cable and aid in handling and installation.  Please refer to the separate fiber specification for details regarding the optical fiber.

1.1 Cable Description

4SProducts Central Tube Fiber Bundle cables contain 2 to 96 optical fibers. The fibers are grouped into bundles held together and identified by colorful thread binders. The fiber bundles are housed in a single gel-filled central buffer tube.  The ADS cable sheath consists of 6 Fiber Reinforced Plastic (FRP) rods, 3 placed longitudinally down each side of the central tube. These strength elements provide the cable with the necessary tensile strength for installation and service loads. Highly visible ripcords are placed along each group of rods for quick and easy sheath entry.  The tube and strength elements are covered with a smooth outer black MDPE jacket.

4SProducts Central Tube Fiber Bundle / Single Jacket optical cables are ideal for low count outside plant applications. Recommended installations include duct and lashed aerial. 
 

1.2 Quality

To meet ISO 9000 standards.

1.3 Reliability

Both initial and periodic qualification testing are performed to assure the cable's performance and durability in the field environment.

To meet industry standards organizations such as Bell Communications Research (Bellcore), Telecommunications Industry Association (TIA), Insulated Cable Engineers Association (ICEA), International Telecommunications Union (ITU), International Electrotechnical Commission (IEC), American Society for Testing and Materials (ASTM), Rural Utilities Service (RUS), and The Institute of Electrical and Electronics Engineers (IEEE).

2. Cable Design

2.1 General

4SProducts Central Tube Fiber Bundle / Single Jacket optical cables utilize a central tube construction which provides for a small diameter cable. The steel armored sheath construction produces a rugged, rodent resistant cable, ideal for direct buried or lashed aerial installations.

APPLICABLE SHEATH TYPES
SHEATH TYPE	PART No.
Single Jacket	FS-XXX*SNDnn

XXX	Denotes Fiber Count
*	Denotes Fiber Type
nn	Denotes Attenuation Values

2.2 Fiber Types

The following fiber types are available in this cable design.  Please refer to the appropriate fiber specification document for details on fiber design and performance.

APPLICABLE FIBER TYPES (*) Fiber Type Specification Designation Multi mode fiber 50/125 µm G.651 B Multi mode fiber 62.5/125 µm TIA-492AAA C Single mode Fiber G.652 S Non-Zero Dispersion Shifted (NZDS) G.655 H

APPLICABLE ATTENUATION VALUES (nn) Fiber Type Description Designation Single mode 0.35/0.25 db/km  1310/1550nm S1 0.40/0.30 db/km 1310/1550nm S2 Non-Zero Dispersion Shifted (NZDS) S3 Custom (Please specify values) S4 Multi mode 62.5/125um, 3.50/1.00 db/km 160/500 Mhz*km, 850/1300nm M1 62.5/125um, 3.50/1.00 db/km 220/500 Mhz*km, 850/1300nm M2 2.5/125um, 3.50/1.00 db/km 350/500 Mhz*km, 850/1300nm M3 62.5/125um, 3.50/1.00 db/km 500/500 Mhz*km, 850/1300nm M4 50/125um, 3.00/1.00 db/km 500/500 Mhz*km, 850/1300nm M5 50/125um, 3.00/1.00 db/km 400/400 Mhz*km, 850/1300nm M6

2.3 Optical Fiber Color Code

The UV acrylate coated fibers are color coded with highly distinguishable, vibrant colors according to the following table.  All colors meet Munsell standards as specified in TIA-359 and TIA-598.

FIBER COLOR CODE FIBER No. COLOR 01 Blue 02 Orange 03 Green 04 Brown 05 Slate 06 White 07 Red 08 Black 09 Yellow 10 Violet 11 Rose 12 Aqua

THREAD BINDER COLORS BINDER No. COLOR 01 Blue 02 Orange 03 Green 04 Brown 05 Slate 06 White 07 Red 08 Black

2.4 Threaded Binders

The colored fibers are grouped together in bundles of either 6 or 12 fibers according to the total fiber count of the cable. For cable counts not evenly divisible by 6 or 12, the remaining odd number of fibers will be placed in a last bundle. The bundles are held together by colorful threads. Two opposite wound threads are used on each bundle to make bundle identification and separation easy.

BUFFER TUBE DIMENSIONS
FIBER PER TUBE	No. Fibers/Bundle	No. of Bundles
02 - 06	N/A	N/A
07 - 36	06	02 - 06
37 - 96	12	04 - 08

 

2.5 Central Buffer Tube

The fiber bundles are placed in a single, gel filled buffer tube. The gel prevents water migration down the tube and can be easily removed from the bundles with isopropyl alcohol. The buffer tube is made with of a semi-translucent thermo-plastic material.

2.6 Cable Water Blocking

The fiber bundles are placed in a single, gel filled buffer tube. The gel prevents water migration down the tube and can be easily removed from the bundles with isopropyl alcohol. The central buffer tube is wrapped with water absorbing tape to prevent the migration of water through the cable.

2.7 Cable Sheath

The ADS cable sheath consists of 6 Fiber Reinforced Plastic (FRP) rods, 3 placed longitudinally down each side of the central tube. These strength elements provide the cable with the necessary tensile strength for installation and service loads. Highly visible ripcords are placed along each group of rods for quick and easy sheath entry.
The tube and strength elements are covered with a smooth outer black MDPE jacket.
 

2.8 Cable Dimensions

LOOSE TUBE CABLE DIMENSIONS
CABLE TYPE	FIBER COUNT	DIAMETER	WEIGHT
FS-XXX*SNDnn	002 - 048	12.5 mm (0.49 in)	130 Kg/km (87 lbs/kft)
	050 - 096	14.5 mm (0.57 in)	166 Kg/km (111 lbs/kft)

Above figures are nominal values; actual production dimensions and weights may deviate slightly from the indicated figures above

2.9 Markings

2.9.1 Cable Markings

 

The entire length of each cable is marked with the following items:

 

	4SProducts Logo
	Year of Manufacture
	4SProducts Part No.
	Fiber Count
	Sequential Length Markings in Meters
	Telephone Handset Symbol

All length markings are placed at one meter intervals.  The actual cable length will be within ±3% of the marked length.  All markings are in indented in permanent white characters.  If remarking is required, yellow markings are used to correct the error in the original markings.

All cable text and markings are in the English language as follows;

 

2.9.2 Tape Markings

 

Non-Hydroscopic tape inside cable will contain the following markings in no more than 50cm distances.

 

	Month / Year of Manufacture
	Purchase Order number

 

2.9.3 Reel Markings

 

The text on the reels is to be printed as follows:

 

	4SProducts Logo
	Cable Type
	Single-Mode X Fiber Count
	Marking Showing Side to Unreel Cable

 

All reels will be painted in 072 royal blue and markings shall be in white.

All reels will contain a securely fastened metal plate with the following information:

 

	Order Number
	Drum Number
	Reel Gross Weight (kg)
	Reel Net Weight  (kg)
	Reel Cable Length (Meters)